Mechanical Parts

 1/4 Inch ARF2000 Air Compressor Filter Regulator Water Oil Separator TrapDescription:Rated flow(L/min) 2000                               Port size 1/4"Max. pressure 0.95MPa(135PSI)Working pressure range 0.05-0.85MPa(7-121PSI) ..

1/4 Inch BSP Mini In Line Air Filter Moisture Trap For Paint Spray GunDescription: Rated Pressure: 1-9kg/cm2 Max. Pressure: ≤9.9kg/cm2 Port size: 1/4"(6mm) BSP Overall length:86mm/3.35"Feature: 1/4" BSP mini lin line air fillter  Filtrate  the moisture and the impurity existing in air line or compre..

1/4 Inch BSP Mini In-Line Oiler For Pneumatic Tool&Air Compressor PipeDescription: Connector size: 1/4 internal thread +1 / 4 external thread Length: 60mm Weight:90g(proximately) Material: Solid brass constructionFeatures: connection between the pneumatic tools and air compressor piping, automatic o..

 Descriptions: 1/4" Threaded BSPP Female Full Ports One Way Air Check Brass Valve Material: Brass Connection: Threaded Specification: 1/4"Features: Made of stainless steel material, have corrosion resistance and good flexibility. Stainless steel fittings connected securely and high voltage capab..

1/4"NPT Air Compressor Filter Pressure Regulator With Drain TrapDescription: This 1/4"NPT air compressor filter is equipped with a drain trap,easy to remove the gas impurities.It is suitable for UT-40/50/60/70/80/100/120/160 series.Specifications:Rated flow(L/min) 2000               ..

1/8 Inch BSP Mini Airbursh Air Filter Moisture Trap For Paint Spray Descripiton: Thread Size:1/8" Overall Length:65mm/2.56"Feature: 1/8" BSP mini lin line air fillter Filtrate  the moisture and the impurity existing in air line or compressor efficientlyea Easy to install on paint spray gunPackage in..

DescriptionsGreat replacement for the broken or missing steel balls on the bearing wheel.Ideal accessory parts for bicycle repairing use.Applications would include casters, conveyors, roller skates, bicycles, overhead trolleys, drawer slides, garage doors and door locks.  Specificat..

Descriptions: 100W Led Lens Reflector Collimator Optical Glass Lens 10 Degree 44mmParameters: Optical glass lens Outer Diameter: 44mm Height: 19mm Bottom Thickness: 3mm Light Transmission Rate: 99% Beam Angle: Angle can adjust Material: High-temperature optical glass Compatible with 10W-100W LED spo..

10mm Bore Diameter Pillow Block Mounted Ball Bearing KP004 Zinc Alloy Description: Type:KP004 Material:znic alloy Inside Diameter:10mm(0.39") The 2 fixing hole spacing:53mm(2.09") Fixed hole diameter:7mmFeature: Durable with high precision Can withstand great weight Angle between the inner bearing a..

10mm Shank Mechanical Edge Finder Position Testing Tool For CNC LatheDescription: Material:HSS with Ti coated Shank:10mm Probe:4mm Overall Length:90mm Precision:0.005mmFeature: Durable with titanium coated Mechancal Rotating test,no clamping error with 0.005mm precision 4mm antimagnetic probe design..

Description: 10Pcs 10x26x8mm Metal Sealed Deep Groove Ball Bearing 6000-2Z 6000-ZZ Deep groove ball bearings. These bearings are pre-lubricated with grease.Specifications: Type: 6000-2Z Materal:Steel, Metal Outer Diameter:26mm Inner Diameter:10mm Thickness:8mmPackage Included: 10 x Bearings..

 Description: 10Pcs 11x5x4mm Steel Shielded Deep Groove Ball Bearing MR115ZZ Deep groove ball bearings. These bearings are pre-lubricated with grease.Specifications: Type:MR115ZZ Materal:Steel, Metal Outer Diameter:11mm Inner Diameter:5mm Thickness:4mmPackage Included: 10 x Bearings..

Description: 10Pcs 12mmx6mmx4mm Steel Shielded Deep Groove Ball Bearing MR126zz Deep groove ball bearings. These bearings are pre-lubricated with grease.Specifications: Type:MR126zz Materal:Steel, Metal Outer Diameter:12mm Inner Diameter:6mm Thickness:4mmPackage Included: 10 x Bearings..

10pcs 150mm*100mm Ziplock Bag Reclosable Plastic Poly Bag Parts Bag  Description Material:plastic Size:150mmX100mm Quantity:10pcsFeatures 150mm*100mm ziplock plastic bag Fit for packaging  electronic components,mechanical parts,gadget  Package included: 10X ziplock bag..

Description: 10Pcs 15x35x11mm Metal Sealed Deep Groove Ball Bearings 6202Z Deep groove ball bearings. These bearings are pre-lubricated with grease.Specifications: Type: 6202Z Material:Steel, Metal Outer Diameter:35mm Inner Diameter:15mm Thickness:11mmPackage Included: 10 x Bearings..

Description: 10Pcs 16mmx8mmx5mm Steel Shielded Deep Groove Ball Bearing 688ZZ Single row deep groove ball bearings. Have 2 metal shields to protect the bearing from dust or any possible contamination. These bearings are pre-lubricated with grease.Specifications: Type:688ZZ Materal:Steel, Metal Outer..

Description: 10Pcs 5x10x4mm Metal Sealed Shielded Deep Groove Ball Bearing MR105ZZ Deep groove ball bearings. These bearings are pre-lubricated with grease.Specifications: Type: MR105ZZ Materal:Steel, Metal Outer Diameter:10mm Inner Diameter:5mm Thickness:4mmPackage Included: 10 x Bearings..

Description: 10Pcs 6001-2RS 12x28x8mm Rubber Sealed Deep Groove Ball Bearing Deep groove ball bearings. These bearings are pre-lubricated with grease.Specifications: Type: 6001-2RS Materal:Steel, Metal Outer Diameter:28mm Inner Diameter:12mm Thickness:8mmPackage Included: 10 x Bearings..

Descriptions : 10pcs 605-ZZ 5x14x5mm Double Shielded Deep Groove Ball Bearings Miniature Bearings A popular size that could be used in many RC Cars and Trucks Type: 605-ZZ Materal: Steel, Metal Size: 5x14x5mm Inner Diameter: 5mm Outer Diameter: 14mm Thickness: 5mmPackage includes: 10X 605-Z..

Descriptions :10pcs 623-ZZ 3x10x4mm Deep Groove Ball Bearings Miniature Bearings A popular size that could be used in many RC Cars and TrucksSpecifications: Type:  623-ZZ Materal: Steel, Metal Size: 3x10x 4mm Inner Diameter: 3mm Outer Diameter: 10mm Thickness: 4mmPackage included:10X 623-ZZ B..

Description: 10Pcs 7x19x6mm Metal Sealed Shielded Deep Groove Ball Bearing 607ZZ Deep groove ball bearings. These bearings are pre-lubricated with grease.Specifications: Type: 607ZZ Materal:Steel, Metal Outer Diameter:19mm Inner Diameter:7mm Thickness:6mmPackage Included: 10 x Bearings..

Description: 10Pcs 8x22x7mm Metal Sealed Shielded Deep Groove Ball Bearing 608zz Deep groove ball bearings. These bearings are pre-lubricated with grease.Specifications: Type: 608ZZ Materal:Steel, Metal Outer Diameter:22mm Inner Diameter:8mm Thickness:7mmPackage Included: 10 x Bearings..

Bearing is available now from our US  warehouseFree shipping to US  in 3-6 business days ship to Canada, Brazil in 7-10 days Description: 10Pcs 8x24x8mm Metal Sealed Shielded Deep Groove Ball Bearing 628ZZ Deep groove ball bearings. These bearings are pre-lubricated with grease.Specifications: ..

Description10pcs M3.5*5 Computer Case Thumbscrews Those thumb screws provide quick installation for securing cases and can easily be tightened by hand without much force.Specifications Material: 1010 Carbon Steel Surface Finish: Zinc Black Standard: M3.5*5 (UNC. 6#-32*5) Color: Black Overall Size: (..

10pcs Red Sealed Deep Groove Skateboard Ball Bearing 608 2RS 8x22x7mmDescription: Material:Titanium+Stainless Steel Type:ball bearing Structure:deep groove Seal type:2RS Precision:ABEC-5 Inner Diameter:8mm Outer Diameter:22mm Width:7mmFeature: Deep groove ball bearing 2RS double sided shield sealing..

Description: 10Pcs Skateboard Groove Roller Blade Ball Bearings Wheels Silver ABEC-5 608-ZZSpecification: Material: Bearing Steel Size: Inner diameter: 8mm          Outer diameter: 22mm          Thickness:    7mm Quantity:10pcsFeatures: Deep Groove Ball Bearings Brand New and high quality Made of Ca..

Decriptions The valve core is good for refrigerants R134a with heat resistance and high pressure resistance.  SpeicificationsType: Standard valve coreScrew Thread: M6 x 0.75Oring: HNBR Material: Copper Height: 19.9mm / 0.78" Color: As the pictures showFeaturesPressure: 0-5..

Description:Deep groove sealed miniature ball bearing.These bearings are pre-lubricated with grease.These balls "bear" the load, allowing the device to spin smoothly.Specifications:Type: 608-2RSMateral:Bearing steelInner Diameter:8mmOuter Diameter:22mmThickness:7mmPackage Included: 1 X 10pcs ..

Description: 12mm 2A/36VAC Metal  Push Button Switch WaterProof Flat LED Lighted SwitchSpecifications:Led Power Switch Latching Type ON/OFFLED Voltage 3V OnlySwitch Rating 2A/36VAC Insulation Resistance 1000 MΩ   ..

12mm Bore Diameter Pillow Block Mounted Ball Bearing KP004 Zinc AlloyDescription: Type:KP001 Material:znic alloy Inside Diameter:12mm(0.47") The 2 fixing hole spacing:56mm(2.20") Fixed hole diameter:7mmFeature: Durable with high precision Can withstand great weight Angle between the inner bearing an..

Specifications: Rotary Shaft Length: Approx. 12mm Shaft Full Length: Approx. 20mm Shaft Diameter: Approx. 6mm Size (L x W): Approx. 15 x 11mm Output: 2-bit gray code Closed Circuit Resistance: 3 ohms maximums Max. Rating: 10 mA @ 5 VDC Operating Temperature Range: -30 to 70 degrees celsius Storage T..

Description: 12mm Rubber Sealed Shielded Linear Ball Bear Bearing LM12UU Deep groove ball bearings. These bearings are pre-lubricated with grease.Specifications: Type: LM12UU Materal:Steel, Metal Outer Diameter:21mm Inner Diameter:12mm Thickness:30mmPackage Included: 1 x Bearings..

 Description: 12V 16mm Angel Eye Metal illuminated LED Push Button Switch Car Dash  Specifications:   Material   Contact Silver alloy Button Nickel plated brass / Stainless stell Enclosure Nickel plated brass / Stainless stell Bas..

Description: 12V 16mm Self Lock Push Button Switch LED Switch For Cars Waterproof Switch Specification:Led Power Switch Latching Type ON/OFFLED Voltage 12V OnlySwitch Rating 3A/250VAC  Insulation Resistance 1000 MΩ ..

Description: 12V 16mm Self Lock Switch Metal WaterProof Push Button LED Lighted SwitchSpecifications:Material Shell/key: Stainless steelContact: AlloyLED Power Switch Latching Type ON/OFFLED Voltage 12V OnlySwitch Rating ..

Description :12V DC 60RPM Powerful Torque Micro Speed Reduction Gear Box Motor Specification : Swap out a poorly running or downright faulty gear box motor for 25mm, 12V, 60RPM replacement and give your electrical and testing equipment a new lease of life. Benefiting from high torque and low noise,..

Descriptions: 12V DC Metal Gear Reducer Motor High Torque DC Gear Box MotorSpecifications: Model Material     Voltage         (V) No Load  At Max.Efficiency    Stall Size   (m..

 12v ELECTRIC FUEL PUMP DIESEL PETROL 12 VOLT is available now from our US warehouseDescription: 12V Electric Fuel Pump Diesel Petrol HEP-02A Metal Electric Fuel PumpFeatures: Lightweight and small size. Easy to fit and connect.(2 bolt fixing , 2 wire design.) Tubing Interface 8mm Plug in co..

 Descriptions: 12V Heavy Duty Eletric Fuel Pump Universal Metal Solid Diesel Petrol Flows:80-85L/H Current:1.4A Voltage:12V pressure:0.3-0.5MPA Eliminates Vapor Lock. Built-In Pressure Relief. Includes metal fuel filter.Features: Corrosion resistant and Vibration Resistant. Lightweight and small..

Description: 1PC 6X8.5MM Micro Stepping Motor Miniature Stepper Motor With Black GearSpecification: Stepper motor diameter: 6 MM Height: 8.5 MM Output shaft: 0.8MM Above with an outside diameter of 2.8 MM 12 plastic gear teeth Output shaft length: 4 MMPackage included: 1x Miniature stepper motor..

1pcs ILQ-9 Sealed Deep Groove Skateboard Ball Bearing 608 2RS 8x22x7mmDescription: Type:ILQ-9 Material:carbon steel Structure:deep groove Seal type:2RS Precision:ABEC-9 Inner Diameter:8mm Outer Diameter:22mm Width:7mm Quantity:1pcsFeature: Deep groove ball bearing 2RS double sided shield sealing des..

20mm Bore Diameter Pillow Block Mounted Ball Bearing KP004 Zinc Alloy Description: Type:KP004 Material:znic alloy Inside Diameter:20mm(0.79") The 2 fixing hole spacing:80mm(3.15") Fixed hole diameter:10mmFeature: Durable with high precision Can withstand great weight Angle between the inner bearing ..

 DescriptionsThis item is made of carbon steel, great replacement for the broken or missing steel balls on the bearing wheel.Ideal accessory parts for bicycle repairing use and rebuilding your bicycle's bottom bracket.Applications would include casters, conveyors, roller skates, bicy..

Description250V 15A Antislip Metal Momentary Industrial Foot Pedal Switch Used to frequent switching and breaking load circuit, reliable product performance, high sensitivity. A contact in two forms. Aluminum frame, high structural strength. Mechanical life is not less than 1 million times, electric..

260pcs General O-ring O Ring O Sealing Ring HNBR Washer SetDescription: This general o sealing ring is made of HNBR(nitrile rubber) with 18 specifications.It has oil,abrasion and corrosion resistant properties.It can stand -40℃ low-temperature and 150℃ high-temperature.It is suitable for many places..

Description: 34 Kinds  Motor Gear Rack Pulley Belt Worm Single Double Plastic Gears Kit Set 34 different kinds of parts and accessories in just one package, which makes it a perfect choice for laboratories, science education, DIY models, RC-airplane/helicopter repair, etc. Our product includes gear,..

Description :34pcs Assorted Stainless Steel Hose Clamp With Driver Clip Style Set Easy to use, pressure-proof, durable. Fits over a hundreds of hose applications. Perfect for using with silicone or rubber hose for fuel and petrol pipe clips.Specification : Material : Stainless Steel Case Size : 220 ..

Description: Push Button Horn Switch ,non-stick buttonPress the button, switch conduction, loosen the line disconnect Specification:Body Material Stainless SteelButton Material Nickel Plated Brass/Stainless Steel Contact Material ..

Description: It has a wide range of functions. It can be applied as the switches for Car.  Material: Shell/key:  Stainless steel Base:   Engineering plastic Contact:  Silver alloySpecification:Led Power Switch latching type:  ON/OFFLED voltage: 12V onlySwitch rating:..

Description: 3V-12V Micro VDC DVD Motor 3V-2700RPM 6V-4000RPM Player Motor Feature:Direct current machine can use DC transform into mechanical energy.The structure is consist of stator and rotor.The surface is smooth and with bright color. Specification:Working range: 1.5-12.0..

Description4.5 inch 45# Steel Bevel Gear Lathe Chuck Tool Box Set The bever gear chuck is well-made, and designed for excellence. Well-made inner chuck structure makes smooth movement. Collets are made of 45# steel, more durable and stable. Different kinds of collet fit to wood in difference sizes.S..

404pcs General O-ring O Ring NBR O Sealing Ring Assortment SetDescription: This general o sealing ring is made of HNBR(nitrile rubber) with 30 specifications.It has oil,abrasion and corrosion resistant properties.It is suitable for many places,such as engineering machinery, general machinery,cylinde..

Desctiptions: 42BYGHW609 Stepper Motor 4000g.cm 1.7A Laser Grind Foam Plasma Cut Brand Name: WANTAIMotor length: 40mm Diameter of axle: 5mm The front shaft length: 24mm Outgoing line: 300mm (Plug is not included)Electrical Specifications: Model Step Angle ( ° ) ..

Descriptions: 4M D-shape Car Truck Motor Door Rubber Seal Strip Weather-strip Seal Made with EPDM rubber, excellent flexibility, excellent waterproof, good effect from abruptly cold to suddenly hot, excellent glutinosity. Specially designed Vehicle Sealed Strip can be used on side of car doors, b..

Descriptions: 5.5mm x 2.1mm DC Power Jack Socket Female Panel Mount ConnectorSpecifications: Name: DC Power Jack / DC power socket Size: 5.5 mmx2.1mm Metal Head DC seat(With nuts) Operating temperature range: -40-55 ℃ Limit load: DC30V 0.5A Contact resistance: ≤ 0.03Ω Insulation resistance: ≥ 100MΩ ..

Description: 50pcs M2 Dia 2mm Hex Screw Nut 304 Stainless Steel Nuts These are the standard,most commonly used hexagon nuts. Metric coarse threads. Metric Full Nut,Grade 8.8Specification: Color: Sliver Material: 304 stainless steel Standard: DIN934Diameter Pitch m S ..

 Description: 6-25mm EPDM Rubber Lined P Clip Cable Wire Fuel Hose Pipe Clamp Easy to use, insulated, durable and long lasting. Effectively absorbing shocks and avoiding abrasion. Perfect for securing brake pipes, fuel lines and wiring amongst many other uses Firmly clamp pipes, hoses and cables ..

Descriptions: 6.35x8mm CNC Motor Jaw Shaft Coupler 6.35mm To 8mm Flexible Coupling #04 Shaft coupler Often used to connect servo motor, stepper motor, encoder, screw driving, machine platform, etc.Specifications: Shaft: 6.35mm x 8mm Length: 25mm Diameter: 20mm Material: Aluminium Size: 20mm x 20mm x..

Descriptions: 60W Copper Diaphragm Pressure Pump Mini High Pressure Electric Pump 8-10KgModel 4439Voltage DC12vCurrent 2.5APower 60WPressure 0.8Mpa~1.0Mpa (3L/min)Motor Speed 4800 (r/min)..

Descriptions: 624VV V Groove Sealed Ball Bearings Vgroove 4x13x6mm 1.7mm DeepSpecifications: Size: 4mm ID x 13mm OD x 6mm THK V groove width: 4mm V groove deepness: 2-2.5mm Color: silverFeatures: Double row angular contact ball, durable metal sealed. Suitable for high-precision, high-speed, high-loa..