0.2/0.3/0.4mm Thermocouple Heating Print Head For 3D Printer
Features:
Working voltage: 12V
Power: 30W
K-Thermocouple: 500mm wire
Size: 0.4mm
Apply to the PLA and ABS /1.75Note:
Heating part must have temperature control, normal working temperature of 190°C to 230°C, the highest temperature setting..
283 SEK
0.2mm 0.3mm 0.35mm 0.4mm 0.5mm 3D Printer Extruder Brass Nozzle Sprinkler Head For Makerbot MK8Specification:
Dimension: 13 x 6mm
Material: Brass
Precision: 0.2mm / 0.3mm / 0.35mm / 0.4mm / 0.5mm
Screw Diameter: 6mm
Inner diameter: 2.0mm
Inner diameter's Accuracy: ±0.2mmPackage included:
1 x ..
101 SEK
0.2mm 0.3mm 0.4mm 0.5mm Nozzle Cleaning Drill Bit Kit For 3D Printer
Feature:
Large chip removal space: Small chip resistance, smooth chip removal, drilling heat is small, can reduce drilling contaminated.
Extraordinary cutting edge sharpness: As a result of nanotechnology and advanced grinding tech..
199 SEK
0.2mm Nozzle 1.75mm Material 3DP03 Heacent RepRap Mendel 3D Printer DIY Assembly Kit
Features:
RepRap Prusa Mendel open source 3D printer, can print itself (ABS PLA) Parts
You can connect your computer to print, can also use TF memory card offline print
You can print what you want, such as phone sh..
7,444 SEK
0.2mm Nozzle 1.75mm Material Heacent Reprap Prusa i3 3D Printer DIY Assembly Kit
Specification:
Brand Name: Heacent
Model: Prusa i3
Printer size: 420 x 425 x 360mm
Net weight: About 6.6KG
Max printing size: 200 x 200 x 180mmNozzle: 0.2mm
Material diameter: 1.75mm
Max resolution: 0.1mm
Print speed: 1..
7,425 SEK
Drill Bits is available now from our UK warehouse0.2mm To 0.5mm Drill Bits Tool Kit For 3D Printer Nozzle CleaningFeatures:Size: 0.2 / 0.25 / 0.3 / 0.35 / 0.4 / 0.45 / 0.5mm
7pcs in a protective plastics case
This powerful and useful tool pack contains 7 Sizes (0.2/0.25/0.3/0.35/0.4/0.45..
203 SEK
0.2mm-0.5mm 3D Printer Extruder Brass Nozzle For Makerbot MK8 3.0MMSpecification:
Dimension: 13 x 6mm
Material: Brass
Precision: 0.2mm / 0.3mm / 0.35mm / 0.4mm / 0.5mm
Screw Diameter: 6mm
Inner diameter's Accuracy: ±0.4mmPackage included:
1 x 3D printer extruder brass nozzle..
98 SEK
0.3mm Nozzle 1.75mm Material 3DP02 DIY Assembly Heacent RepRap Mendel 3D Printer Kit
Features:
RepRap Prusa Mendel open source 3D printer, can print itself (ABS PLA) Parts
You can connect your computer to print, can also use TF memory card offline print
You can print what you want, such as phone sh..
7,444 SEK
0.3mm Nozzle 1.75mm Material Heacent Reprap Prusa i3 3D Printer DIY Assembly Kit
Specification:
Brand Name: Heacent
Model: Prusa i3
Printer size: 420 x 425 x 360mm
Net weight: About 6.6KG
Max printing size: 200 x 200 x 180mmNozzle: 0.3mm
Material diameter: 1.75mm
Max resolution: 0.1mm
Print speed: 1..
7,425 SEK
0.3mm Nozzle All-Metal Assembled J-head E3D Extrusion Kit With Heat Wire For 3D Printer ReprapFeature:
Size: Total length 89mm
Material: Metal
Weight: 80g
Extrusion nozzle: 0.3mm
Print Material: 3.0mm and 1.75mm consumables (materials, including: ABS, PLA, pvc, wood, etc.).
Heating tube: Default vol..
404 SEK
0.4mm Nozzle 1.75mm Material 3DP04 Heacent RepRap Mendel DIY Assembly 3D Printer Kit
Features:
RepRap Prusa Mendel open source 3D printer, can print itself (ABS PLA) Parts
You can connect your computer to print, can also use TF memory card offline print
You can print what you want, such as phone sh..
7,444 SEK
0.4mm Nozzle 3mm Material 3DP01 DIY Assembly 3D Printer Heacent RepRap Mendel Kit
Features:
RepRap Prusa Mendel open source 3D printer, can print itself (ABS PLA) Parts
You can connect your computer to print, can also use TF memory card offline print
Safe: With stainless steel self-lock screws at t..
7,444 SEK
0.4mm Nozzle GB Copper Brass For 3D Printer Creatbot
Feature:
Special use for Creatbot 3D printer nozzle, nozzle diameter is 0.4 mm
Nozzle material is used in the national standard copper, with a non-GB copper in the market (ie recycled copper) have a clear distinction
Nozzle thermal performance is ..
275 SEK
1 Pc 5 x 8mm Flexible Z Axes Motor Shaft Coupler Fix For 3D Printer RepRap Mendel Prusa CNCFeature:
Easy to install
Low inertia fit for high-speed operation
Shaft coupler often used to connect servo motor, stepper motor, encoder, screw driving, machine platform, etc.
Inner diameter: 5 x 8mm ( on..
123 SEK
Description :1.5m 5FT USB 2.0 A to B Male M/M Printer Print HighSpeed Cable Cord Plug ScannerUSB Type A Male to Type B Male Cable For Many USB Printer, Scanner or Hard Drive Digital DevicesBrand New High Quality USB 2.0 Data CableBackwards Compatible with 1.1 and 1.0 DevicesConnector: Type A Male to..
114 SEK
3D Printer Filament is available now from our US and UK warehouseFree shipping to US and UK in 3-6 business days
ship to Canada, Brazil in 7-10 days
1.75mm 3D Printer ABS Filament For Makerbot Mendel Printrbot Reprap Prusa SumpodDescription:
3D printer has been used by designers, engineers and sc..
655 SEK
3D Printer Spool is available now from our US and UK warehouseFree shipping to US and UK in 3-6 business daysship to Canada, Brazil in 7-10 days in US warehouse
ship to European countries in 7-10 days in UK warehouse
1.75mm 3D Printer PLA Filament For Makerbot Mendel Printrbot Reprap PrusaDescript..
680 SEK
1.75mm Filament V2.0 Hotend Extrusion Head Two 0.35-0.5mm Nozzle For 3D Printer Reprap
Introduction:
The 2.0 version is a high performance hotend for use with RepRap and other 3D printers,making your printing even faster. The hot end comes completely assembled: wire it to your electronics and it is ..
1,168 SEK
100Pcs 4.8mm X 8mm Extruder Strong Spring For 3D Printer
Dimension:
Diameter: 4.8mm
Length: 8mm
Quantity: 100pcs
Strong spring for 3D Printer extruderPackage included:
100 x Extruder strong spring..
218 SEK
10M 2GT-6mm Rubber Opening Belt S2M GT2 Belt For 3D Printer
Feature:
Type: 2GT-6mm
GT2 Pitch: 2mm
Belt Height: 1.38mm
Tooth Height: 0.75mm
Material: Rubber
Quantity: 10 meters
Width: 6mm
Shape: Open timing beltPackage included:
1 x 10M 2GT-6mm Rubber Opening Belt..
300 SEK
10M 2GT-6mm Rubber Opening Belt + 2Pcs 2GT 16 Teeth Timing Pulley Wheel10M 2GT-6mm Rubber Opening Belt:
Type: 2GT-6mm
GT2 Pitch: 2mm
Belt Height: 1.38mm
Tooth Height: 0.75mm
Material: Rubber
Quantity: 10 meters
Width: 6mm
Shape: Open timing belt2GT 16 Teeth Timing Pulley Wheel:
Name: 2GT 16 Aluminum..
342 SEK
10M 2GT-6mm Rubber Opening Belt + 2Pcs 5mm 2GT-20 Teeth Timing Pulley Wheel10M 2GT-6mm Rubber Opening Belt:
Type: 2GT-6mm
GT2 Pitch: 2mm
Belt Height: 1.38mm
Tooth Height: 0.75mm
Material: Rubber
Quantity: 10 meters
Width: 6mm
Shape: Open timing belt5mm 2GT-20 Teeth Timing Pulley Wheel:
Name: 2GT-20 ..
342 SEK
10M 2GT-6mm Rubber Opening Belt + 2Pcs 8mm 2GT-20 Teeth Timing Pulley Wheel10M 2GT-6mm Rubber Opening Belt:
Type: 2GT-6mm
GT2 Pitch: 2mm
Belt Height: 1.38mm
Tooth Height: 0.75mm
Material: Rubber
Quantity: 10 meters
Width: 6mm
Shape: Open timing belt8mm 2GT-20 Teeth Timing Pulley Wheel:
Name: 2GT-20 ..
342 SEK
10Pcs 0.4mm 3D Printer Extruder Brass Nozzle For Makerbot MK8Specification:
Dimension: 13 x 6mm
Material: Brass
Precision: 0.4mm
Screw Diameter: 6mm
Inner diameter: 2.0mm
Inner diameter's Accuracy: ±0.2mmPackage included:
10 x 0.4mm 3D printer extruder brass nozzle..
246 SEK
10Pcs 2GT-20 Teeth Timing Pulley Wheel 5mm Inner For 3D Printer
Feature:
Name: 2GT-20 Aluminum tooth belt wheel
Tooth: 7.5MM
Overall Length: 18.5MMInner: 5MM
Two M3 keyhole 90° distribution
Outside diameter: 18MM
Tooth number: 20
Tooth pitch: 2mm
Hole diameter: 5mm
Flange: double
Tooth width: 7mm
2P..
315 SEK
10Pcs 2GT-20 Teeth Timing Pulley Wheel 8mm Inner For 3D Printer
Feature:
Name: 2GT-20 Aluminum tooth belt wheel
Tooth: 7.5MM
Overall Length: 18.5MMInner: 8MM
Two M3 keyhole 90° distribution
Outside diameter: 18MM
Tooth number: 20
Tooth pitch: 2mm
Hole diameter: 5mm
Flange: double
Tooth width: 7mm
2P..
315 SEK
10Pcs 3D Printer Stepstick DRV8825 Stepper Driver Reprap 4 Layer PCB
Descrition:
The module has an interface pinout is almost the same with A4988 stepper motor drive carrier, so that it can be used as a higher performance in a pull-down menu the plates replaced in many applications.
DRV8825 featu..
414 SEK
10Pcs A3967 V44 EasyDriver Stepper Motor Driver Development Board
Description:
Stepper motor is usually defined with stepping angle or numbers of steps parameter, the general motor revolution is divided into 200 steps, which is the step angle of 1.8 degrees, EasyDriver has the function of interval s..
295 SEK
10Pcs Makerb/Reprap Rapid Prototype 3D Printer Accessories Bearing
Description:
Material: stainless steel
Inner diameter: 8mmPackage included:
10 x Bearing
..
112 SEK
10Pcs Synchronous Belt Locking Spring For 3D Printer
Feature:
Weight: 8g
Suitable for 6.0 - 6.1mm synchronous belt.
Dimension of spring filament: 0.8mm, width: 4mm, length: 8mmPackage included:
10 x Locking spring..
90 SEK
12Pcs Leveling 8mm Extruder Springs For 3D Printer
Specifications:
Diameter(OD): 4.8mm/0.19inch
Length: 8mm/0.32inch
Internal diameter: 3.20mm/0.13inch
Material: stainless steel
Good formability, homogeneous elastic.
High plasticity, fatigue resistance, heat corrosion resistance.
Environmental prote..
94 SEK
12V 40W 6mm x 20mm Cartridge Heater Reprap For 3D Printer
Feature:
Single-head electric heat pipe used to can't work in the connection on both ends of the heating medium, is widely used in mould heating, hot core box, shoot core machine is used in medium heating equipment
Core: ceramic
Voltage: 12V
..
100 SEK
14Pcs 70cm 2Pin/3Pin/4Pin Female To Female Jumper Dupont Cable For Endstops 3D printer
Feature:
Type: 2Pin/3Pin/4Pin
Head: Female - female
Length: 70cm
These jumpers can be used in any of your electronic items. Such as 3D printers, Arduino boards, modules
Quantity: 14pcsPackage included:
6 x 3 PIN c..
198 SEK
3D Printer Heatproof Heat Resisting Resistant Proof Tape 200mm x 30mDescription:
High insulation, high temperature, low temperature, acid and alkali, abrasion, tear, adhesion strength, tear after masking the surface without leaving traces
200mm x 30m heat resisting tape: this product
5mm x 30m he..
389 SEK
2 x GT2 Timing Pulleys + 2M GT2 Timing Belt for RepRap Prusa Mendel is available now from our UK warehouse
Free shipping to UK in 3-6 business days
ship to Other European countries in 7-10 days
Description : 2 x GT2 Timing Pulleys + 2M GT2 Timing Belt for RepRap Prusa MendelPulleys Details:M..
179 SEK
Description : 2 x T2.5 Timing Pulleys + 2M T2.5 Timing Belt for RepRap Prusa MendelTiming Belt Details :
Materials : Polyurethane, Nylon Reinforced, Extruded Endless
Good Anti-Cracking Performance, and Small Extending Rate
Long Service Life, Bearing Wear and Tear, Resistant to Oil, Heat
Normall..
320 SEK
20/36T 8mm Bore 6mm Width GT2 Aluminum Timing Pulley For 3D PrinterSpecifications:Tooth: 20/36 (T)
Pitch: 2 (mm)
Bore: Dia.8 (mm)
Material: Aluminum Alloy
Belt Width: 6 (mm)Note: This pulley is for 2mm pitch 6mm width GT2 timing belt.Package includes:1 x GT2 Aluminum timing belt pulley..
124 SEK
20Pcs Extruder Strong Spring For 3D Printer
Dimension:
Diameter: 4.8mm
Length: 8mm
Quantity: 20pcs
Strong spring for 3D Printer extruderPackage included:
20 x Extruder strong spring..
106 SEK
20Pcs Makerb/Reprap Rapid Prototype 3D Printer Accessories Bearing
Description:
Material: stainless steel
Inner diameter: 8mmPackage included:
20 x Bearing
..
144 SEK
2Pcs 2GT 16 Teeth Timing Pulley Wheel + 5M 2GT-6mm Rubber Opening Belt2GT 16 Teeth Timing Pulley Wheel:
Name: 2GT 16 Aluminum tooth belt wheel
Overall Length: 18.5MMInner: 5MM
Two M3 keyhole 90° distribution
Outside diameter: 18MM
Tooth number: 16
Hole diameter: 5mm
Tooth width: 7mm
2PS Setscrews: M..
241 SEK
2Pcs 2GT-20 Teeth Timing Pulley Wheel 5mm 8mm Inner For 3D Printer
Feature:
Name: 2GT-20 Aluminum tooth belt wheel
Tooth: 7.5MM
Overall Length: 18.5MM
Inner: 8MM / 5MM (optional)
Two M3 keyhole 90° distribution
Outside diameter: 18MM
Tooth number: 20
Tooth pitch: 2mm
Hole diameter: 5mm
Flange: doubl..
127 SEK
30 Pcs 3D Printer Thermistor NTC 100k / 100ohm Match MK2a 1% SensorDescription:
Resistance: 100Kohm + / -1%
B value: 3950 + / -1%
Accuracy: + / -1%
Glass packaging: 2.0 + / -0.2mm
Lead length: 32 + / -5mm
Operating temperature range:-50 to +260°C
Thermal time constant (τ): τ=10 - 17 s ( in still air..
164 SEK
3D Printer 2.0 Assembled Sealed Transparent Shell
Technical parameters:
Construction dimensions: 225 x 145 x 150mm
Input voltage: 220V 50 / 60HzMaterial: 1.75mm PLA / ABS
Connection: SD card, USB cableNozzle diameter: 0.4mm
Nozzle flow rate: 2.4cc / h
Movement speed: 20-120mm / s
Positioning accurac..
19,507 SEK
3D Printer A4988 Reprap Stepping Stepper Step Motor Driver ModuleDescription:
A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up..
121 SEK
3D Printer Accessories Arduino MEGA Ultimaker Shield Control Board
Descroption:
This board is for Arduino MEGA as Ultimaker UltiStepper drive and compatible with Pololu stepper driver boards.
You can add as many stepper driver carriers as you need.
It is very similar to other Pololu based electr..
413 SEK
3D Printer Assembled Me Creator Mini Desktop Kit With 2004 Display 0.3mm Nozzle 1.75mm Material
Feature:
Motherboard: Sanguinololu V1.3a
Extruder: MK8
Print range: 150 x 150 x 150mm
Machine size: 300 x 290 x 300mm (L x W x H)
Material: 1.75mm (ABS / PLA) (not included)
Nozzle: 0.3mm
Heating platform..
8,804 SEK
3D Printer Control Board Reprap Brainwave Motherboard
Features:
Size: 60 x 79mm
12V power input
Fan Control
Micro USB connector
Double Z-axis connector
All connectors at edge of board, vertical or right-angle connectors will fit.
Atmel AT90USB646 microcontroller w/ USB bootloader
1, 2, 16 or 32x mic..
1,425 SEK
3D Printer Control Board Rumba MPU Optimized Version RUMBA Board
Description:
Name: RUMBA
Size: 135 x 175MM
Weight: 90g
Power input: 12-35V
Support electric quantity: 6
Motor driven support: A4988, DRV8825
Control panel support: LCD2004 LCD12864
The build environment: For Arduino IDE
With firmware: ..
1,374 SEK
3D Printer Control Board Rumba MPU With A4988 Heatsink
Description:
Name: RUMBA
Size: 135 x 175MM
Weight: 90g
Power input: 12-35V
Support electric quantity: 6
Motor driven support: A4988, DRV8825
Control panel support: LCD2004 LCD12864
The build environment: For Arduino IDE
With firmware: Marlin
The..
1,666 SEK
RAMPS 1.4 CONTROLLER is available now from our US and UK warehouseFree shipping to US and UK in 3-6 business daysship to Canada, Brazil in 7-10 days in US warehouse
ship to European countries in 7-10 days in UK warehouse
3D Printer Controller For RAMPS 1.4 Reprap Mendel Prusa Support Arduino Board..
187 SEK
3D Printer Delta Rostock Mini Sanguinololu V1.3a High Accuracy 2004LCD DIY Kit
Introduce:
The Rostock mini is a delta 3D printer based on the modified design of the original Rostock created by Johann. The printer is designed to have a smaller build volume allowing for a smaller, more compact, portab..
10,375 SEK
3D Printer DIY Kit Mega2560 Ramps1.4 A4988 LCD2004 MK2A Endstop Thermistor
Feature:
This is a 3D Printer Starter Kit, developed specially for those beginners who are interested in 3D printer. You may learn about through using these basic projects.Mega2560 Board:
Working voltage: 5V
Input voltage (re..
1,784 SEK
3D Printer DIY Kit Ramps1.4 A4988 Mega2560 MicroSD Endstop Thermistor
Feature:
This is a 3D Printer Starter Kit, developed specially for those beginners who are interested in 3D printer. You may learn about through using these basic projects.RAMPS 1.4:
Extended to control other accessories.
Fusion 5..
940 SEK
3D Printer Dual-head Hot End Extruder 0.3/0.35/0.4/0.5mm Nozzle
Feature:
The Dual-head Hotend extruder combines the newly designed hotend version 2.0 couples together and you will have options of the nozzles from o.3mm, 0.35mm,0.4mm and 0.5mm.
This Dual-head Hotend Extruder supports two color printi..
1,910 SEK
3D Printer Extruder Controller 2.2 Control Module Board Motherboard
Description:
This board is a combination of the PWM Driver Board, DC Motor Driver Board, Temperature Sensor Board, RS485 comms, and an Arduino!
All on one board. It has screw terminals for easy hookup, as well as a power jack for..
851 SEK
3D Printer Extruder Thermocouple Double Nozzle Printing Head
Feature:
Operating voltage: 12V
Nozzle: 0.2 / 0.3 / 0.4 / 0.5mm (optional)
Fans line length: 0.35m
Heating head cable length: 0.5m
Stepper motor cable length: 1m
Movement shaft speed: 40mm / h
Nozzle flow rate: about 24cc / h
Print Materia..
1,891 SEK
3D Printer Generation 6 Electronics Control Board Motherboard
Description:
Generation 6, or Gen6, can be described as a dedicated, Plug-&-Play, single board solution for FFF/FDM 3D Printers. It is designed to be professionally manufactured, with many small surface mount components, as opposed to G..
945 SEK
3D Printer Heatbed MK2B 12V 24V Heat Bed For Prusa MendelMK2B can select two operating voltage of 12V and 24VSpecifications:
Dimensions: 214 x 214 x 2mm
Laminate FR4 1.6±0.15mm
2 layer, 35μm copper
Black Soldermask - both sides
White Silkscreen - both sides
Power Input: 12V / 24V
Power: 120W
Resista..
364 SEK
3D Printer J-head Hotend For 1.75/3.0MM Filament Short Distance Type
Specification:
Suitable for both 1.75mm and 3.0mm E3D J-head extruder hotend
The whole length: approx 50mm
Material: AluminumPackage included:
1 x 3D printer extuder..
130 SEK
3D Printer Kit DIY Assembly Machine RepRap Prusa I3 Third Generation
Introduce:
The Reprap Prusa Mendel I3 is the newest 3D printer for now, it's design reference and draw lessons from the former two generations of the printer Prusa and Reprap.
The structure design is more professional and more eleg..
11,336 SEK