Menu
Menu
Filter
Your Cart
Privacy Policy
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.

Module Board

100Pcs DC 5V 5mW 650nm 6mm Red Copper Head Tube Laser Dot Diode Module Features: Working life: more than 2000 hours Spot mode: dot facula, continuous output Laser wavelength: 650nm (red) Copper head diameter: 6mm Light power:..
477 SEK
Add to Cart
100W DC-DC 3V-35V To 3.5V-35V Adjustable Boost Voltage Module Performance parameters: 1. Input voltage range: 3-35V DC (Note: the input voltage is less than 4V, voltmeter failure). 2. Input current: 7A. 3. Output voltage range: 3.5-35V DC(please to ensure that output voltage need to above on inp..
191 SEK
Add to Cart
10Pcs 1-Channel 12V H/L Level Trigger Optocoupler Relay Module For ArduinoFeature: 1-channel relay module, with photoelectric isolation High or Low level changeable(by a jumper setting trigger) The module uses genuine quality relay With power and relay action indicator Operating voltage: 12V M..
252 SEK
Add to Cart
10Pcs 10Pin Convert To Standard 6Pin Adapter Board For ATMEL STK500 AVRISP USBASPFeature: For the AVRISP USBASP STK500 programmer standard interface to standard 6PIN 10PIN Interface Converter AVR MCU development board can be used to download interface converter The ISP interface converter can be use..
210 SEK
Add to Cart
10Pcs 10PINS NRF24L01 2.4GHz Wireless Transceiver Module For Arduino Description: Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. 125 Channels, Multi-point communication and frequency hopping to m..
266 SEK
Add to Cart
10Pcs 12V 1 Channel Relay Module With Optocoupler H / L Level Triger For ArduinoFeature: Working voltage 12V High / Low level changeable Normally open interfaces maximum load: AC 250V / 10A, DC 30V / 10A Using SMD optocoupler isolation, driving ability, stable performance Trigger current 5mA F..
301 SEK
Add to Cart
10Pcs 2 Way Relay Module With Optocoupler Protection Feature: The relay contact capacity 250V 10A Relay outputs normally open, normally closedActive low 5V relay signal input voltage range: 0-5VVCC system power JD-VCC power relay Default 5V relay JD-VCC and VCC shorted on itPackage inclu..
346 SEK
Add to Cart
10Pcs 24 Bit AD HX711 Weighing Pressure Sensor Module For ArduinoDescription: The module uses 24 high-precision A / D converter chip HX711, is designed specifically for high-precision electronic scales, two analog channel input, the internal integration of 128 programmable amplifier gain of. The in..
240 SEK
Add to Cart
10Pcs 3V To 5V 1A USB Charger DC-DC Converter Step Up Boost ModuleFeatures: Module uses the Taiwan production boost chip, high efficiency (up to 92%), plus built-in over-current protection chip, can be more good to protect the module and use the device after the class. Module with undervoltage pro..
288 SEK
Add to Cart
10Pcs 3W LED Module High Power Module For Arduino Feature: Color temperature: Warm White 3000-3200K / white 6000-6500K Forward current: 700MA Luminous flux: White 180-200LM (lumens) , Red 90-100LM (lumens) , Green 80-90LM (lumens) Forward voltage: 3.3 - 3.6 V Reverse voltage: 5V Power: 3W Viewing an..
269 SEK
Add to Cart
10Pcs 4 x 3 Matrix 12 Key Array Membrane Switch Keypad Keyboard For Arduino Description: Pad Size: 68.9 x 76 x 0.8mm Cable length: 85mm (include connector) Connector: dupont 7 pins, 0.1 inch (2.54mm) Pitch Mount style: Self-Adherence Max. circuit rating: 35VDC, 100mA Insulation spec.: 100M Oh..
230 SEK
Add to Cart
10Pcs 433Mhz RF Transmitter With Receiver Kit For Arduino ARM MCU Wireless Description: This is 433Mhz RF transmitter with receiver kit for Arduino ARM MCU wireless Application environment: Remote control switch, receiver module, motorcycles, automobile anti-theft products, home security product..
208 SEK
Add to Cart
10Pcs 4x4 16-Key Matrix Keypad Keyboard Module 16 Buttons For ArduinoSpecification: 4 x 4 Matrix Keyboard 16 Buttons Size: 39 x 43mmPackage included: 10 x 16 key 4 x 4 matrix keypad keyboard..
230 SEK
Add to Cart
10Pcs 5V 16M ATmega328P Arduino Compatible Version LilyPad 328 Main BoardDescription: The Arduino Compatible LilyPad is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread. The boar..
592 SEK
Add to Cart
10Pcs 5V KY-040 Rotary Encoder Module For Arduino AVR PICDescription: The rotary encoder is used to measure the speed and with PWM technology can achieve rapid speed devicesWith fixed bolt hole for easy installationGreat for DIY projectSpecification:Model: KY-040Working voltage: 5V Material: PCB +..
267 SEK
Add to Cart
10Pcs 5V To 3.3V DC-DC AMS1117 800MA Step-Down Power Supply Buck Module Features: Size: 8.6 x 12.33 mm Input voltage: DC 4.2 V - 10 V Output: 3.3 V, 800 mANote: 1.Boost modules or buck module indicate the operating voltage, Please do not exceed operating voltage, or it will be damaged easily! 2.Boos..
137 SEK
Add to Cart
10Pcs BH1750FVI Light Intensity Sensor Module For AVR Arduino 3V-5V Power Features: ROHM original chip BH1750FVI Sensor built 16 bit AD converter Digital output directly, omitting complex calculations and calibration Not distinguish ambient light Spectral characteristics close to visual sensit..
376 SEK
Add to Cart
10Pcs Black KY-012 Buzzer Alarm Module For Arduino PC Printer Description: Brand: KEYES Model: KY-012 Arduino buzzer module Active speaker Compatible with PC, printer, car audio system DIYSpecifications: Voltage: 5V Color: Black + silver gray Package dimension: 77x42x13mm Weight: 5gPackage..
225 SEK
Add to Cart
10Pcs Blue DC 3V-40V To 1.5V-35V Adjustable Step Down ModuleSpecification: Model: HCJ - IPM - V2 Color: Blue Adjustable input voltage: 3.0 - 40V Adjustable output voltage: 1.5V - 35V(require input voltage 1.5V higher than output voltage) Maximum output current: 3APackage included: 10 x Blue Ad..
228 SEK
Add to Cart
10Pcs BMP180 Digital Barometric Pressure Sensor Module BoardFeatures: This module is precise, small and ultra-low power consumtion is 3μA. It can be used in mobile devices. It boast of good performance and the lowest absolute accuracy can achieve 0.03hPa. BMP180 makes use of  the powerful 8-pin cera..
361 SEK
Add to Cart
10Pcs CJMCU-49 HMC5883L Electronic Compass Three Axis Magneto Resistive Sensor Module Specification: Plate size: 16 x 18 mm Supply voltage: 3.3V or 5V Pin spacing: 2.54mm (100mil) Low power consumption: Supply voltage 1.8V Power sleep mode: 2.5 microamp Measurement mode: 0.1mA Small package size: 3 ..
204 SEK
Add to Cart
10Pcs DC 4 Key Matrix Membrane Switch Control Keypad Keyboard With LEDSpecification: Mount style: self-adherence Pad size: 69 x 20mm Cable length: 4.2inch/106mm (include connector) Connector: DuPont 5 pins Mount style: self-adherence Circuit rating(max): 3.5V(DC) 100mA,1W Contact resistance: ..
320 SEK
Add to Cart
10Pcs DC 5V 3MM x 10MM WS2812B SMD LED Board Built-in IC-WS2812 Description: Light source: 5050 RGB SMD Sheet material: aluminum substrate IC models: WS2811 Gray levels: 256 Light Angle: 180 ° Emitting light colors: can through the controller tuning for, white, red, yellow, blue, green, etc Standard..
120 SEK
Add to Cart
10Pcs DC 5V 4 Phase 5 Wire Stepper Motor With ULN2003 Driver BoardDescription: This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board 5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug, easy to u..
428 SEK
Add to Cart
10Pcs DC 5V 5mW 650nm 6mm Red Copper Head Tube Laser Dot Diode Module Features: Working life: more than 2000 hours Spot mode: dot facula, continuous output Laser wavelength: 650nm (red) Copper head diameter: 6mm Light power:..
121 SEK
Add to Cart
10Pcs DC 5V KY-003 Hall Magnetic Sensor Module For ArduinoDescription:Brand: KEYESModel: KY-003Magnetic, speed, gap inductionSuitable for Arduino DIY projectWorking voltage: DC 5VMaterial: PCBFeature: Small size and high sensitivity. Fast response temperature and good performance. Precision and high..
187 SEK
Add to Cart
10Pcs DC-DC 0.9V-5V USB Output Charger Step Up Power Module Description: Input voltage: 0.9V - 5V Output voltage: 5.1 - 5 .2 V Output Current: Rated 1A - 1.5A (single lithium input), the maximum 1.5A (single lithium input) Efficiency: Up to 96% (the higher the input voltage, the higher the efficienc..
202 SEK
Add to Cart
10Pcs DC-DC Adjustable Step Down Power Supply Buck Module 1.2-35V Description : This is high performance DC to DC Step Down Adjustable Power Supply Module, Based on well know LM2596 Switching Regulator. Module name: LM2596 step-down Regulator power supply moduleSpecification: Input voltage: 4.5-..
350 SEK
Add to Cart
10Pcs Digispark Kickstarter Micro USB Development Board For ATTINY85 Arduino Features: Support for the Arduino IDE 1.0+ (OSX / Win / Linux) Power via USB or External Source - 5V or 7 -35V (automatic selection) On-board 500ma 5V Regulator Built-in USB(and serial debugging) 6 I/O Pins (2 are used for ..
569 SEK
Add to Cart
10Pcs DS18B20 DC 5V Digital Temperature Sensor Module For Arduino Features: It's easy to install with mounting holes, diameter of the hole is 2.5m. Digital signal output 18B20 Temperature Sensor Chip Resolution adjustment ranges from 9-12 bytes. Operating current: DC5V. Temperature measurement range..
362 SEK
Add to Cart
10Pcs DS18B20 Digital Temperature Sensor Module For ArduinoDescription: This is DS18B20 digital temperature sensor module for Arduino -55°C~125°C Digital signal output Detect ambient air temperature Compatible with Arduino DIY project Main chip: 18B20 temperature sensor Material: PCBSpecificat..
324 SEK
Add to Cart
10Pcs DS3231 AT24C32 IIC High Precision Real Time Clock Module For Arduino Description: DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. The device incorporates a battery input, disconnect the main..
252 SEK
Add to Cart
10Pcs HC-SR04 Ultrasonic Ranging Sensor Ultrasonic Module For Arduino Description: Working Voltage : 5V(DC) Static Current: Less than 2mA. Output Signal: Electric frequency signal, high level 5V, low level 0V. Sensor Angle: Not more than 15 degrees. Detection Distance: 2cm-450cm. High Precision: Up ..
321 SEK
Add to Cart
10Pcs HC-SR501 Human Infrared Sensor Module Including Lens Feature: Operating Voltage: DC 5V-20V Static power consumption: 65 microamps Level Output: High 3.3V , Low 0V Delay time:Adjustable (0.3 seconds to 10 minutes) Blocking time: 0.2 seconds Trigger: L can not be repeated, H can be repeated, th..
263 SEK
Add to Cart
10Pcs IIC/I2C/TWI/SP Serial Interface Module Port For 5V Arduino 1602LCD Display Description: This is another great IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity..
251 SEK
Add to Cart
10Pcs Infrared Obstacle Avoidance Sensor For Arduino Smart Car RobotDescription: The sensor module light is adaptable to the environment, the working voltage of 3.3 V to 5 V. It has a pair of infrared transmitting and receiving tube, when detecting direction meet with obstacles (reflecting surfac..
259 SEK
Add to Cart
10Pcs IR Receiver Infrared Radiation Module 38KHz TSOP4838 DIP-3Feature: Type: TSOP4838 IR receiver module Operating frequency: 38KHz Directivity: 45 Operating temperature range: -25°C to +85°C Supply voltage range: 2.7V to 5.5V Opto case style: through hole Size: 3 x 0.5cmPackage included: ..
151 SEK
Add to Cart
10Pcs Jog Type Touch Sensor Module For ArduinoDescription: This is jog type capacitive touch switch sensor module based on a touch detection IC TTP223B. Normally, the output is low level(at mode of low power consumption). When the finger touch the corresponding location, output will be high(at quic..
227 SEK
Add to Cart
10Pcs KY-005 38KHz Infrared IR Transmitter Sensor Module For ArduinoDescription: This is 38KHz Infrared IR transmitter sensor module For Arduino Brand: KEYES Model: KY-005 Transmit 38KHz modulating signal Suitable for Arduino DIY project Material: PCBPackage included: 10 X IR Infrared transmitter mo..
202 SEK
Add to Cart
10Pcs KY-013 Analog Temperature Sensor Module For ArduinoDescription: The temperature sensor is a NTC thermistor Multi-point temperature measurement Measures temperatures: -55°C / +125°C Accuracy: + / - 0.5°C Material: mixed material Dimensions: 3 x 1.5 x 0.6cm Weight : 2gPackage included: 10..
202 SEK
Add to Cart
10Pcs KY-016 RGB 3 Color LED Module For Arduino Red Green BlueDescription: This is RGB 3 color LED module for Arduino red green blue Brand: KEYES Module: KY-016 Material: PCB RGB signal output 3 color: Red, green, blue Compatible with Arduino DIY projectPackage included: 10 x RGB 3 color LED..
202 SEK
Add to Cart
10Pcs KY-022 Infrared IR Transmitter Sensor Module For ArduinoDescription: Infrared receiving module adopts 1838 infrared receiving head Light resistance, strong electromagnetic interference, built-in infrared dedicated IC, can work under 500 lux light intensity Widely used in: stereo, TV, video ..
202 SEK
Add to Cart
10Pcs KY-038 Microphone Sound Sensor Module For ArduinoDescription: Brand: KEYES Model: KY-038 Adopt LM393 main chip Electric condenser microphone Features Single channel signal output Low level output signal used for sound control light Great module for sound alarm system Working voltage: D..
277 SEK
Add to Cart
10Pcs LM2596 DC-DC Adjustable Step Down Power Supply ModuleDescription: Input voltage: 4.5-35V Output voltage: 1.5-35V(Adjustable) Output current: Rated current is 2A,maximum 3A(Additional heatsink is required)Features: Conversion Efficiency: Up to 92% (output voltage higher, the higher the efficien..
258 SEK
Add to Cart
10Pcs LM386 Mini DC 3V To 12V Amplifier Board Signal Amplifier Module Features: Circuit board with FR4-A quality PCB processing, and after tinning process, quality and beautiful. With a volume control knob, easy to adjust the volume.Description: Product name: LM386 amplifier board Size: 37 x 41 mm O..
337 SEK
Add to Cart
10Pcs LM393 760nm - 1100nm IR Infrared Flame Sensor Module For ArduinoDescription: This module is sensitive to the flame, but also can detect ordinary light. Usually used as a flame alarm. On board, digital output interface can be directly connected with the microcontroller IO.Feature: Detects a f..
232 SEK
Add to Cart
10Pcs MB102 Breadboard Module Adapter Shield 3.3V/5V For Arduino BoardDescription: Breadboard power supply module, compatible with 5 V, 3.3 V Apply to MB102 breadboard Input voltage: 6.5-12 V (DC) or USB power supply Output voltage: 3.3V/5V can switch over Maximum output current:..
221 SEK
Add to Cart
10Pcs Mini 1A Lithium Battery Charging Module Board With USB InterfaceDescription: Charging method: linear charge 1% Charging current: 1A adjustable Charge accuracy: 1.5% Input voltage: 4.5V-5.5V Full charge voltage: 4.2V Charging indicator: Red charging green full charge Charging input inter..
155 SEK
Add to Cart
10Pcs Mini DC-DC Converter Adjustable Power Supply Step Down ModuleDescription: This is a DC power step down converter module that is ultra light weight, just the size of a finger nail. This  Mini DC-DC Adjustable Step Down Converter is used for DIY mobile power, monitor power supply, buggies powe..
318 SEK
Add to Cart
10Pcs Mini IR Pyroelectric Infrared PIR Motion Human Body Sensor Module Features: Weight: 7g (approx) Color: White + Green Dimension: 3.2cm x 2.4cm x 2.8cm (approx) Infrared sensor with control circuit board The sensitivity and holding time can be adjusted Working Voltage Range: DC 4.5V- 20V ..
274 SEK
Add to Cart
10Pcs MQ-3 Alcohol Sensor Breath Gas Detection Module For ArduinoDescription: The main chip: LM393, MQ-3 gas sensor Operating voltage: DC3-5V Response time: ≤10s (70% Response) Recovery time: ≤30s (70% Response) Heating resistance: 31Ω±3Ω Heating Current: ≤180mA Heating Voltage: 5V±0.2V Heating Powe..
438 SEK
Add to Cart
10Pcs NRF24L01+ 2.4GHz Antenna Wireless Transceiver Module For MCU ArduinoDescription: The real GFSK monolithic transceiver chip Built-in hardware and link layer Automatic response and automatic retransmission function Address and CRC check function Channel switching time is very short, can be ..
265 SEK
Add to Cart
10Pcs NRF24L01+ 2.4GHz Antenna Wireless Transceiver Module For MCU Description: Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications 125 Communications channels, Multi-point communication and frequency ..
229 SEK
Add to Cart
10Pcs One Bit WS2812B Serial 5050 Full Color LED Module For Arduino Parameter: Size: 14 mm x 12 mm Chip: WS2811 (Built-in LED) LED: 5050 encapsulation RGB full-color highlighted Voltage: 5V Port: digital Platform: Arduino SCMFeature: 5050 highlight LED, built-in control chip, only 1 IO mouth..
235 SEK
Add to Cart
10Pcs PFM Control DC-DC 0.9V-5V Step-up Power Supply ModuleDescription: Mini PFM Control On-board input voltage indicator High conversion efficiency, maximum to 96% Any DC voltage input 0.9V ~ 5V, output 5V DC voltage can be stable, with two AA batteries input to the output current of 500-600MA, sin..
171 SEK
Add to Cart
10Pcs PS2 Game Joystick Module For Arduino Description: This is PS2 game joystick module for Arduino Lots of robot projects need joystick. This module provides a affordable solution to that. Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch ..
234 SEK
Add to Cart
10Pcs Serial Port Mini RS232 To TTL Converter Adapter MAX3232CSE Description: A converter board for electrical levels Quantity: 10 piece Chip Model: MAX3232CSE Voltage Range: 3-5V Max. Baud Rate: No more than 120kbps Dimension: 15.875mm x 9.398mm x 2.54mmPackage included: 10 x RS232 TTL conv..
230 SEK
Add to Cart
10Pcs Slot Socket Reader SD Card Module For Mp3 Arduino CompatibleDescription: Make your SD application more easier and simple It is easily interfaced as a peripheral to your arduino sensor shield module Through programming, you can read and write to the SD card using your arduino Can be used fo..
190 SEK
Add to Cart
10Pcs Socket Adapter Plate For 8Pin NRF24L01+ Wireless ModuleFeature: Quantity: 10 Voltage: 3.3V Size: 26 x 19 x 12mm It's for 8 Pin NRF24L01+ Module A simple socket board which is for NRF24L01 Wireless module on-board AMS1117-3.3 chip It could be used with NRF24L01 Wireless module Wireless module ..
227 SEK
Add to Cart
10Pcs Soil Hygrometer Humidity Detection Moisture Sensor For Arduino Description : This is a summary of the soil moisture sensor can be used to detect moisture, when the soil is dry, the module outputs a high level, whereas output low. Using this sensor make an automatic watering system, so that you..
256 SEK
Add to Cart
Showing 1 to 60 of 831 (14 Pages)
Filter Products